Auto Scan mode, press the left Ctrl twice, or, press any front button. Scan Type and Scan
Rate set the scan pattern. Scan Type ( F4 : More\Scan Type) determines if scanned
computers must also be eye mark selected. Scan Rate ( F4 : More\Scan Rate) sets the display
interval when a computer is selected before selecting the next one.
Manual Scan
Scan through power-on computers one by one by the keyboard control. You can type ( F4 :
More\Scan Type) to determine if scanned computers must also be eye mark selected. Press the
up arrow key “ Ï “ to select the previous computer and the down arrow key “ Ð “ to select
the next computer. Press any other key to abort the Manual Scan mode.
Audio Stick
An optional multimedia module can be LINKed to the back of each KVM Switch for selecting
microphone and stereo speaker signals. There are two options for Audio Stick: On and Off.
When set to 'On', audio selection follows computer selection. When set to 'Off', audio selection
stops following computer selection. It is useful if you want to listen to a particular computer's
audio signal while operating other computers. The non-volatile memory stores the Audio Stick
setting.
Scan Type
Ready PC +1: In Scan mode, scan through power-on and eye mark selected computers.
Ready PC: In Scan mode, scan through power-on computers.
1 Only: In Scan mode, scan through any 1 selected computer regardless of computer power
status. The non-volatile memory stores the Scan Type setting.
Scan Rate
Sets the duration of a computer displayed in Auto Scan mode. The options are 3 seconds, 8
seconds, 15 seconds, and 30 seconds. The non-volatile memory stores the Scan Rate setting.
Keyboard Speed
Digital KVM via IP offers keyboard typematic setting that overrides the similar settings in BIOS
and in Windows. Available speed options are Low, Middle, Fast and Faster as 10, 15, 20 and
30 characters/sec respectively. The non-volatile memory stores the Keyboard Speed setting.
Hotkey Menu
When you hit the left Ctrl key twice within two seconds, the "Hotkey Menu" appears displaying
a list of hotkey commands if the option is On. The 'Hotkey Menu' can be turned Off if you prefer
not to see it when the left Ctrl key is hit twice. The non-volatile memory stores the Hotkey
Menu setting.
CH Display
Auto Off: After you select a computer, the port number and name of the computer will appear
on the screen for 3 seconds then disappear automatically. Always On: The port number and
name of a selected computer and/or KVM-OSD status displayed on the screen all the time. The
non-volatile memory stores the CH Display setting.
Position
The position of the selected computer and/or IP-OSD status displays on screen during the
operation. The actual display position shifts due to different VGA resolution, the higher the
resolution the higher the displayed position. The non-volatile memory stores the Position
setting.
Upper Left, Upper Right,
Lower Left, Lower Right,
Middle.
40
(33 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais